Wisconsin Tanker CDL Practice Test

This is a free 20-question practice test for the Tanker portion of the Wisconsin Commercial Driver's License knowledge exam. Questions are pulled from a pool of 50 drawn from the AAMVA CDL Manual, which is the source document the Wisconsin Division of Motor Vehicles uses to write its actual exam.

How it works: Click an answer. The correct choice highlights in green, and you'll see a short explanation. Aim for 85% or better before you sit for the real test in Wisconsin.

Question 1 of 20

A "smooth bore" tank has:

No internal divisions
Internal baffles
Compartments
Reinforcement rings

Correct. A smooth-bore tank has no internal divisions or baffles. Surge is dramatic; brake gently to avoid being pushed forward by the load.

Question 2 of 20

Tanker pre-trip should specifically check:

Tank shell, intake/discharge/cut-off valves, manhole covers, venting devices, and pressure-relief equipment
Only the tires
Only the engine
Only the placards

Correct. In addition to standard pre-trip, inspect the tank shell, all valves, manhole covers, vents, and pressure-relief devices.

Question 3 of 20

When loading a cargo tank with flammable liquid, the driver must:

Stay alert, within 25 feet, with a clear view of the tank, and ready to handle emergencies
Leave for lunch
Smoke
Run the engine at high RPM

Correct. Federal rule: driver remains within 25 feet, alert, with a clear view, ready to act in case of overflow or emergency.

Question 4 of 20

Cargo tanks must be inspected and tested:

Periodically per CFR requirements; intervals depend on tank specification (MC-306, MC-307, MC-312, DOT-406, etc.)
Once a decade
Never
Only when leaks appear

Correct. Cargo tanks have specific inspection and test schedules based on their DOT specification (visual, leakage, internal, pressure, and thickness tests).

Question 5 of 20

Carrying a smooth-bore tank up a ramp or off a curb:

Causes minimal surge
Can produce strong front-to-back surge that affects throttle and traction
Has no effect
Improves traction

Correct. Climbing causes the load to surge backward and then forward as you level off — affecting throttle response, traction, and braking.

Question 6 of 20

When driving a tanker through a sharp bend at the recommended speed for cars:

You are likely to roll over
You are safe
You will accelerate
Brakes engage automatically

Correct. Tanker rollovers regularly happen at posted "car" curve speeds. Slow well below posted speeds in a loaded tanker.

Question 7 of 20

Tank specification "MC-306" or "DOT-406" generally refers to:

Cargo tanks designed for non-pressure flammable and combustible liquids (e.g., gasoline, diesel)
High-pressure gases
Cryogenic liquids
Hazardous solids

Correct. MC-306 (older) and DOT-406 (current) are non-pressure cargo tanks for flammable and combustible liquids — typical fuel tankers.

Question 8 of 20

A "tank vehicle" requiring an N endorsement is generally defined as:

Any commercial vehicle
A vehicle used to transport liquid or gaseous materials in a tank with rated capacity of 1,000 gallons or more, individual tanks of 119+ gallons
Only fuel trucks
Only vehicles over 80,000 lbs

Correct. The N endorsement is required for any commercial vehicle hauling liquid or gas in a permanently mounted tank or portable tank with rated capacity of 1,000+ gallons (and individual tanks of 119+ gallons).

Question 9 of 20

Outage refers to:

Empty space left at the top of a tank to allow liquid expansion
The brake-out system
A power failure
A driver shortage

Correct. Outage is the empty space left at the top of a tank to allow liquid to expand as it warms. Different liquids require different outage percentages.

Question 10 of 20

Bonding and grounding during product transfer:

Equalizes electrical potential between the tank and receiving container, preventing static-spark ignition
Charges the battery
Cools the load
Speeds delivery

Correct. Static electricity builds up during liquid transfer. Bonding (cable between tank and receiving container) plus grounding equalizes potential to prevent ignition.

Question 11 of 20

Tankers have a high center of gravity because:

The driver sits high
The load is in a tall, narrow tank
The cargo is light
The cab is wide

Correct. A tank carries its load high above the road. The center of gravity is much higher than for a flatbed of the same weight, increasing rollover risk.

Question 12 of 20

Tankers should be driven with:

Less following distance
More following distance and gentler control inputs than a dry van
The same as a car
Higher speeds

Correct. Tankers stop slower and roll easier. Increase following distance and use gentler steering and braking inputs.

Question 13 of 20

A loaded tanker on a curve is most likely to:

Roll over because surge plus high CG amplifies side forces
Skid in a straight line
Brake faster
Steer easier

Correct. Side surge plus high CG creates a tipping moment well above what a flat-bed of equal weight produces. Speed reduction in advance is the only safe answer.

Question 14 of 20

A "bottom-loaded" tank:

Is loaded through bottom valves to reduce vapor and static
Is loaded only at the top
Carries cargo at the bottom only
Has no top vents

Correct. Bottom-loading uses sealed bottom-loading equipment with vapor recovery, reducing static and vapor escape compared to splash-loading from the top.

Question 15 of 20

A tanker with a high center of gravity is most prone to rollover during:

Straight-line driving
Tight curves, evasive maneuvers, and exit ramps
Backing
Stopping

Correct. High center of gravity makes tankers roll on tight curves, sudden lane changes, and exit ramps. Slow well in advance.

Question 16 of 20

When backing a tanker, you should:

Move slowly and watch for the high mounted lights and clearance, since the tank shape may affect visibility
Move quickly
Use only the trailer brake
Skip the helper

Correct. Tankers can have unusual mirror angles and rear visibility. Use a helper, move slowly, and watch for tank-mount lights and overhead clearance.

Question 17 of 20

Front-to-back surge is most likely to cause:

The vehicle to be pushed forward when braking
The vehicle to roll over
Better braking
No effect

Correct. Front-to-back surge pushes the rig forward when you brake — drivers have been pushed through stop lines by an unexpected forward surge.

Question 18 of 20

On a wet road, a tanker should:

Maintain normal speed
Reduce speed by about one-third
Drive faster
Use only the trailer brake

Correct. On wet pavement, reduce speed by about one-third. On snow, by about one-half. Tankers are less forgiving than dry vans on slippery roads.

Question 19 of 20

When driving a tanker, you should:

Drive faster on curves
Drive slower than posted curve speeds, especially on exit ramps
Use only the trailer brake
Match car speeds

Correct. Posted advisory speeds assume cars. A loaded tanker may roll over at the posted speed — slow well below posted speeds for ramps and curves.

Question 20 of 20

When unloading from a top-mounted hatch, you should:

Use the ladder safely, follow fall-protection rules, secure the hatch after
Skip the ladder
Jump down
Open all hatches at once

Correct. Top-mount work involves fall hazard. Use the ladder safely, follow fall-protection procedures, and secure hatches after.

About the Wisconsin Tanker exam

Most states administer 20 Tanker questions and require 80% to pass. Topics include the unique handling of liquid loads, surge effects, baffles vs. smooth-bore, outage and expansion, inspection of the cargo tank, and emergency procedures.

The Wisconsin Division of Motor Vehicles follows the federal CDL standards established by FMCSA. To earn the Tanker credential, you must answer at least 80% of the questions correctly. Many candidates score lower the first time because the test pulls from a large pool — refreshing this page will give you a different mix of questions, drawn from the same authoritative source.

Want more practice? Try the full Tanker question bank or browse all Wisconsin CDL practice tests.