Wisconsin Hazmat CDL Practice Test

This is a free 20-question practice test for the Hazmat portion of the Wisconsin Commercial Driver's License knowledge exam. Questions are pulled from a pool of 68 drawn from the AAMVA CDL Manual, which is the source document the Wisconsin Division of Motor Vehicles uses to write its actual exam.

How it works: Click an answer. The correct choice highlights in green, and you'll see a short explanation. Aim for 85% or better before you sit for the real test in Wisconsin.
Question 1 of 20
When in the cab with the engine running, the hazmat shipping paper must be:
Correct. When in the seat with the engine running, keep shipping papers within reach (driver-side door clip or on the seat). When out of the vehicle, leave on the seat or in the door pouch.
Question 2 of 20
A hazmat driver must complete which special training?
Correct. PHMSA requires general awareness, function-specific, safety, security awareness, and in-depth security training (when a security plan applies). Carriers document and re-train every three years.
Question 3 of 20
Class 1.1, 1.2, or 1.3 explosives must be parked:
Correct. Division 1.1, 1.2, and 1.3 explosives, and Division 2.3 or 6.1 PIH cargo, must have an attended-vehicle (qualified person within 100 feet, awake, able to see the vehicle).
Question 4 of 20
You should keep the hazmat shipping paper:
Correct. Hazmat shipping papers must be identifiable to emergency responders — tabbed or kept on top of other paperwork, in the seat or door pouch when the driver is out.
Question 5 of 20
The Hazardous Materials Table (HMT) lists:
Correct. The HMT in 49 CFR §172.101 lists every hazardous material with its proper shipping name, hazard class, identification number, packing group, label requirements, and special provisions.
Question 6 of 20
Hazard Class 3 is:
Correct. Class 3 is flammable liquids — gasoline, diesel, ethanol, alcohols, etc.
Question 7 of 20
Placards must be displayed on:
Correct. Placards are displayed on all four sides of the vehicle — front, back, and both sides.
Question 8 of 20
When transporting hazmat, you must check the cargo every:
Correct. Federal cargo securement: check at the start, then every 150 miles or 3 hours of driving, plus every change of duty status.
Question 9 of 20
Inhalation hazard placards (Division 6.1 PIH or Division 2.3) require:
Correct. PIH (Poison Inhalation Hazard) materials require a primary hazard-class placard plus an "INHALATION HAZARD" subsidiary placard.
Question 10 of 20
Who is responsible for proper hazmat packaging and labeling?
Correct. The shipper packages, labels, and certifies the materials. The carrier and driver verify and refuse non-compliant shipments.
Question 11 of 20
When refueling a hazmat-loaded vehicle:
Correct. Engine off, no smoking within 25 feet of the vehicle being fueled, and someone must be in control of the fueling at the nozzle.
Question 12 of 20
The Emergency Response Guidebook (ERG) is used to:
Correct. The ERG cross-references the four-digit ID number from the placard or shipping paper to a guide page with isolation distance, response procedures, and first aid.
Question 13 of 20
When loading a vehicle with hazardous materials, you should:
Correct. Set the parking brake, chock wheels of cargo tank vehicles, and shut off the engine before loading or unloading flammables.
Question 14 of 20
When a hazmat shipment crosses international borders:
Correct. Cross-border hazmat may require documentation in compliance with both jurisdictions, plus customs paperwork.
Question 15 of 20
Placards must be at least how many inches on each side?
Correct. Placards are diamond-shaped, at least 250 mm (about 10.75 inches) on each side.
Question 16 of 20
When loading hazmat that requires segregation, the driver must:
Correct. The segregation table in 49 CFR §177.848 lists which classes cannot be loaded together. Refusing improperly mixed loads is the driver's responsibility.
Question 17 of 20
Hazard Class 8 is:
Correct. Class 8 is corrosive materials — sulfuric acid, sodium hydroxide, hydrochloric acid, etc.
Question 18 of 20
Placards are required when:
Correct. Table 1 materials always require placards (any amount). Table 2 materials require placards when 1,001 pounds or more of any combination is loaded.
Question 19 of 20
A driver's responsibilities for hazmat include:
Correct. The driver verifies the shipment, placards if required, carries the documentation, follows routes and parking rules, and handles incidents per training.
Question 20 of 20
The 24-hour emergency response phone number on the shipping paper:
Correct. The 24-hour emergency contact must be a person knowledgeable about the materials, available 24/7. Many shippers contract CHEMTREC or similar.

About the Wisconsin Hazmat exam

Most states administer 30 Hazmat questions and require 80% to pass. The exam covers hazard classes, the shipping paper, placards and labels, loading and unloading, driving and parking rules, emergency response, and the Emergency Response Guidebook (ERG).

The Wisconsin Division of Motor Vehicles follows the federal CDL standards established by FMCSA. To earn the Hazmat credential, you must answer at least 80% of the questions correctly. Many candidates score lower the first time because the test pulls from a large pool — refreshing this page will give you a different mix of questions, drawn from the same authoritative source.

Want more practice? Try the full Hazmat question bank or browse all Wisconsin CDL practice tests.