South Carolina Hazmat CDL Practice Test
This is a free 20-question practice test for the Hazmat portion of the South Carolina Commercial Driver's License knowledge exam. Questions are pulled from a pool of 68 drawn from the AAMVA CDL Manual, which is the source document the South Carolina Department of Motor Vehicles uses to write its actual exam.
How it works: Click an answer. The correct choice highlights in green, and you'll see a short explanation. Aim for 85% or better before you sit for the real test in South Carolina.
Question 1 of 20
Placards must be displayed on:
Correct. Placards are displayed on all four sides of the vehicle — front, back, and both sides.
Question 2 of 20
Hazardous materials are products that:
Correct. Hazardous materials (hazmat) are products that pose a risk to health, safety, or property during transportation. Hazmat regulations are codified in 49 CFR.
Question 3 of 20
Inhalation hazard placards (Division 6.1 PIH or Division 2.3) require:
Correct. PIH (Poison Inhalation Hazard) materials require a primary hazard-class placard plus an "INHALATION HAZARD" subsidiary placard.
Question 4 of 20
A hazmat driver must complete which special training?
Correct. PHMSA requires general awareness, function-specific, safety, security awareness, and in-depth security training (when a security plan applies). Carriers document and re-train every three years.
Question 5 of 20
When in the cab with the engine running, the hazmat shipping paper must be:
Correct. When in the seat with the engine running, keep shipping papers within reach (driver-side door clip or on the seat). When out of the vehicle, leave on the seat or in the door pouch.
Question 6 of 20
You discover a leak in a Class 3 (flammable liquid) shipment. You should:
Correct. Stop in a safe location, secure the area, call 911, and notify your dispatcher. Do not transfer cargo by the side of the road.
Question 7 of 20
A hazmat carrier with hazmat cargo must conduct security awareness training:
Correct. PHMSA requires re-training every three years, including security awareness and the carrier's in-depth security plan if applicable.
Question 8 of 20
Placards are required when:
Correct. Table 1 materials always require placards (any amount). Table 2 materials require placards when 1,001 pounds or more of any combination is loaded.
Question 9 of 20
A driver's responsibilities for hazmat include:
Correct. The driver verifies the shipment, placards if required, carries the documentation, follows routes and parking rules, and handles incidents per training.
Question 10 of 20
When loading hazmat that requires segregation, the driver must:
Correct. The segregation table in 49 CFR §177.848 lists which classes cannot be loaded together. Refusing improperly mixed loads is the driver's responsibility.
Question 11 of 20
A driver of a hazmat-loaded vehicle must check the tires:
Correct. Hazmat drivers must check tires at the beginning and again each time the vehicle is parked. A flat or smoking tire must be addressed before continuing.
Question 12 of 20
When you place placards on a vehicle, the placard ID number (when applicable) must:
Correct. Bulk packagings and certain shipments require the four-digit UN/NA number on each side and end of the package, on the placard, or on an orange panel.
Question 13 of 20
Where can a hazmat-placarded vehicle never be parked?
Correct. Never park within 5 feet of the traveled portion of a road. Avoid populated areas, near open fires, and near places where people congregate.
Question 14 of 20
Placards must be at least how many inches on each side?
Correct. Placards are diamond-shaped, at least 250 mm (about 10.75 inches) on each side.
Question 15 of 20
A vehicle that has been transporting hazmat may need to be:
Correct. After unloading, the vehicle may need decontamination depending on the cargo. Placards may need to be removed unless residue still requires them.
Question 16 of 20
Class 1.1, 1.2, or 1.3 explosives must be parked:
Correct. Division 1.1, 1.2, and 1.3 explosives, and Division 2.3 or 6.1 PIH cargo, must have an attended-vehicle (qualified person within 100 feet, awake, able to see the vehicle).
Question 17 of 20
Hazard Class 8 is:
Correct. Class 8 is corrosive materials — sulfuric acid, sodium hydroxide, hydrochloric acid, etc.
Question 18 of 20
You may use a flame to check for hazmat leaks:
Correct. Never use a flame to check anything near hazmat. Use a flashlight or other intrinsically safe light.
Question 19 of 20
When a hazmat shipment crosses international borders:
Correct. Cross-border hazmat may require documentation in compliance with both jurisdictions, plus customs paperwork.
Question 20 of 20
When you transport Division 1.1 or 1.2 explosives, you must have a written route plan:
Correct. A written route plan is required for transporting Division 1.1 or 1.2 explosives. The driver must follow it unless there is an emergency.
About the South Carolina Hazmat exam
Most states administer 30 Hazmat questions and require 80% to pass. The exam covers hazard classes, the shipping paper, placards and labels, loading and unloading, driving and parking rules, emergency response, and the Emergency Response Guidebook (ERG).
The South Carolina Department of Motor Vehicles follows the federal CDL standards established by FMCSA. To earn the Hazmat credential, you must answer at least 80% of the questions correctly. Many candidates score lower the first time because the test pulls from a large pool — refreshing this page will give you a different mix of questions, drawn from the same authoritative source.
Want more practice? Try the full Hazmat question bank or browse all South Carolina CDL practice tests.