Rhode Island Tanker CDL Practice Test

This is a free 20-question practice test for the Tanker portion of the Rhode Island Commercial Driver's License knowledge exam. Questions are pulled from a pool of 50 drawn from the AAMVA CDL Manual, which is the source document the Rhode Island Division of Motor Vehicles uses to write its actual exam.

How it works: Click an answer. The correct choice highlights in green, and you'll see a short explanation. Aim for 85% or better before you sit for the real test in Rhode Island.

Question 1 of 20

Tankers should be driven with:

Less following distance
More following distance and gentler control inputs than a dry van
The same as a car
Higher speeds

Correct. Tankers stop slower and roll easier. Increase following distance and use gentler steering and braking inputs.

Question 2 of 20

Cargo tanks must be inspected and tested:

Periodically per CFR requirements; intervals depend on tank specification (MC-306, MC-307, MC-312, DOT-406, etc.)
Once a decade
Never
Only when leaks appear

Correct. Cargo tanks have specific inspection and test schedules based on their DOT specification (visual, leakage, internal, pressure, and thickness tests).

Question 3 of 20

Compartmented tanks have:

Liquid-tight bulkheads dividing the tank into separate sections
No divisions
Smooth interior
Only baffles

Correct. Compartmented tanks have liquid-tight bulkheads. Each compartment is loaded separately, allowing different products in one trailer.

Question 4 of 20

A tanker hauling food-grade product (e.g., milk):

Often uses a smooth-bore tank for cleaning
Uses a baffled tank
Uses a compartmented tank only
Uses no tank

Correct. Smooth-bore tanks (no internal baffles) are easier to clean for food-grade products. The trade-off is severe surge — drive slower and brake earlier.

Question 5 of 20

Empty tankers handle:

The same as loaded tankers
Differently — lighter axle weight reduces braking traction; tankers are also more affected by crosswinds when empty
Always better
Always worse

Correct. Empty tankers have less brake traction (less weight on tires) and are more affected by crosswinds. Never assume empty equals safer.

Question 6 of 20

When driving a tanker through a sharp bend at the recommended speed for cars:

You are likely to roll over
You are safe
You will accelerate
Brakes engage automatically

Correct. Tanker rollovers regularly happen at posted "car" curve speeds. Slow well below posted speeds in a loaded tanker.

Question 7 of 20

Tank vehicles should not be driven:

On long downgrades without a lower gear and intermittent firm braking
On any highway
Anywhere
At night

Correct. On long downgrades, select a low gear before starting down and use firm intermittent brake applications to prevent fade.

Question 8 of 20

You should never load a tank completely full because:

It is illegal in all states
Liquids expand when warmed and need outage; over-filling can rupture the tank
Trucks won't move
It saves no time

Correct. Liquids expand with temperature. Without outage, a warming load can over-pressurize and rupture the tank.

Question 9 of 20

Tankers have a high center of gravity because:

The driver sits high
The load is in a tall, narrow tank
The cargo is light
The cab is wide

Correct. A tank carries its load high above the road. The center of gravity is much higher than for a flatbed of the same weight, increasing rollover risk.

Question 10 of 20

When you discover a leak in a cargo tank carrying flammable liquid:

Continue to the destination
Stop in a safe location, secure the area, contact emergency response and the carrier — never transfer cargo on the road
Try to drive around the leak
Pour water on it

Correct. A leaking flammable cargo tank is a major incident — secure the area, evacuate per the ERG, contact emergency services. Never attempt roadside cargo transfer.

Question 11 of 20

A "bottom-loaded" tank:

Is loaded through bottom valves to reduce vapor and static
Is loaded only at the top
Carries cargo at the bottom only
Has no top vents

Correct. Bottom-loading uses sealed bottom-loading equipment with vapor recovery, reducing static and vapor escape compared to splash-loading from the top.

Question 12 of 20

On a wet road, a tanker should:

Maintain normal speed
Reduce speed by about one-third
Drive faster
Use only the trailer brake

Correct. On wet pavement, reduce speed by about one-third. On snow, by about one-half. Tankers are less forgiving than dry vans on slippery roads.

Question 13 of 20

Outage requirements:

Vary by liquid because of differing thermal expansion rates
Are always 1 percent
Do not exist
Are only for water

Correct. Outage requirements differ by product. Gasoline expands more than diesel, ethanol expands differently, etc. Check the shipping paper or product specifications.

Question 14 of 20

When backing a tanker, you should:

Move slowly and watch for the high mounted lights and clearance, since the tank shape may affect visibility
Move quickly
Use only the trailer brake
Skip the helper

Correct. Tankers can have unusual mirror angles and rear visibility. Use a helper, move slowly, and watch for tank-mount lights and overhead clearance.

Question 15 of 20

A heavy liquid load with a baffled tank may still surge:

Front-to-back, despite the baffles
Not at all
Less than smooth-bore but baffles do not stop side-to-side surge
None of the above

Correct. Baffles reduce front-to-back surge but do not affect side-to-side surge — bulkheads are typically transverse, not longitudinal.

Question 16 of 20

Liquid in a partially filled tank causes:

No special concern
Surge — the load slosh that affects vehicle handling
Better fuel economy
Improved braking

Correct. Surge is the side-to-side or front-to-back movement of liquid in a partially filled tank — it can throw the rig forward, pull it sideways, and significantly affect handling.

Question 17 of 20

Loading dock procedure for cargo tanks of flammable liquid:

Set parking brake, chock wheels, shut off engine, ground and bond, monitor loading, follow loading-rack procedures
Leave the engine running
Skip the chocks
Smoke nearby

Correct. Standard loading-rack procedure: brake set, chocks in, engine off, bond and ground, monitor loading, follow rack-specific procedures (vapor recovery, load arms, etc.).

Question 18 of 20

When you drive a tanker on slippery roads, you should:

Drive faster
Reduce speed substantially and increase following distance
Use only the trailer brake
Maintain normal speed

Correct. Reduce speed by at least one-third on wet roads, by half on snow. Liquid loads make recovery from a skid much harder.

Question 19 of 20

Tank specification "MC-307" or "DOT-407" generally refers to:

Cargo tanks for low-pressure liquids and certain hazardous chemicals
Explosives
Bulk solids
Refrigerated gases

Correct. MC-307/DOT-407 are insulated low-pressure tanks for chemicals — common for many industrial liquids.

Question 20 of 20

When unloading from a top-mounted hatch, you should:

Use the ladder safely, follow fall-protection rules, secure the hatch after
Skip the ladder
Jump down
Open all hatches at once

Correct. Top-mount work involves fall hazard. Use the ladder safely, follow fall-protection procedures, and secure hatches after.

About the Rhode Island Tanker exam

Most states administer 20 Tanker questions and require 80% to pass. Topics include the unique handling of liquid loads, surge effects, baffles vs. smooth-bore, outage and expansion, inspection of the cargo tank, and emergency procedures.

The Rhode Island Division of Motor Vehicles follows the federal CDL standards established by FMCSA. To earn the Tanker credential, you must answer at least 80% of the questions correctly. Many candidates score lower the first time because the test pulls from a large pool — refreshing this page will give you a different mix of questions, drawn from the same authoritative source.

Want more practice? Try the full Tanker question bank or browse all Rhode Island CDL practice tests.