Oregon Doubles/Triples CDL Practice Test
This is a free 20-question practice test for the Doubles/Triples portion of the Oregon Commercial Driver's License knowledge exam. Questions are pulled from a pool of 50 drawn from the AAMVA CDL Manual, which is the source document the Oregon Driver and Motor Vehicle Services uses to write its actual exam.
How it works: Click an answer. The correct choice highlights in green, and you'll see a short explanation. Aim for 85% or better before you sit for the real test in Oregon.
Question 1 of 20
When backing a doubles or triples combination:
Correct. Doubles and triples cannot be backed safely beyond a few feet — joints flex unpredictably. Plan your route and parking to avoid backing.
Question 2 of 20
Drivers should always couple the heaviest trailer:
Correct. Heaviest trailer goes directly behind the tractor; lightest goes at the rear. This minimizes rearward amplification and rollover risk.
Question 3 of 20
Triples are restricted in many states. You should:
Correct. Many states restrict triples to specific routes (turnpikes, designated corridors). Verify legality and route before crossing into a state.
Question 4 of 20
Driving doubles or triples on the highway:
Correct. Multi-trailer rigs are more sensitive to abrupt steering, take longer to brake, and amplify any movement to the rear. Be gentle and plan ahead.
Question 5 of 20
A converter-dolly fifth wheel must be:
Correct. Inspect for proper lubrication, no excessive wear, and confirm the locking jaws operate correctly. The dolly fifth wheel is just as critical as the tractor's.
Question 6 of 20
During a pre-trip on doubles, the trailer-supply line:
Correct. The supply line carries air from tractor through every trailer; verify open valves at every coupled connection and a closed valve at the rear of the rear-most trailer.
Question 7 of 20
A converter dolly is:
Correct. A converter dolly has a small frame, axle(s), and a fifth wheel mounted on top — it transforms a semi-trailer into a full trailer behind another trailer.
Question 8 of 20
When pulling doubles in a tunnel:
Correct. Tunnel clearance can be tight for long doubles — watch overhead and side clearance, and respect any vehicle-class restrictions.
Question 9 of 20
Safety chains on a converter dolly are required to:
Correct. Safety chains catch the dolly if the pintle hook releases or fails — preventing the trailer behind from breaking loose.
Question 10 of 20
Glad-hand shut-off valves at the rear of trailers (for connecting to a following trailer) must be:
Correct. Open the shut-off valves where the next trailer is connected; close them at the rear of the last trailer to prevent air loss.
Question 11 of 20
A tractor pulling doubles cannot brake as quickly as a tractor pulling a single trailer because:
Correct. Greater weight and longer air lines mean longer braking distance. Plan stopping distance with extra margin.
Question 12 of 20
You discover a flat tire on the rear trailer of a triple. You should:
Correct. A flat tire affects rig stability and brake load. Pull off safely, use warning devices, and address the tire.
Question 13 of 20
In a multi-trailer combination, the most violent movement during evasive maneuvers happens at:
Correct. Rearward amplification (crack-the-whip effect) is greatest at the rear-most trailer. The last trailer in a triple can be thrown sideways with much greater force than the tractor.
Question 14 of 20
When inspecting a doubles or triples rig, you should additionally check:
Correct. Every connection point and every trailer needs inspection — pintle hooks, chains, dollies, lights, brake lines, glad-hands, and air-supply valves.
Question 15 of 20
When pulling a single trailer and trying to figure out if you should add a doubles endorsement:
Correct. The T endorsement is required only when you actually operate doubles or triples. Single-trailer operations do not require it.
Question 16 of 20
When pulling triples, you should:
Correct. Stay right, plan lane changes well in advance, signal early, and avoid abrupt steering. Triples crack-the-whip violently.
Question 17 of 20
A "doubles" combination uses a tractor plus:
Correct. Doubles = tractor + lead semi-trailer + converter dolly + second semi-trailer (which becomes a full trailer once on the dolly).
Question 18 of 20
When testing the brakes on a doubles rig:
Correct. Test the entire rig: build-up time, leakage, low-pressure warning, parking brake, and confirm rear-trailer brake function.
Question 19 of 20
The driver of a doubles rig should:
Correct. Smooth, gradual inputs are critical. Avoid abrupt steering and abrupt braking.
Question 20 of 20
Crosswinds are particularly hazardous for:
Correct. Empty trailers in a multi-trailer rig present a large flat surface to crosswinds — a strong gust can blow the rear trailer over.
About the Oregon Doubles/Triples exam
Most states administer 20 Doubles/Triples questions and require 80% to pass. The exam emphasizes coupling and uncoupling the converter dolly, rearward amplification (the "crack-the-whip" effect), and the unique inspection and handling demands of multi-trailer rigs.
The Oregon Driver and Motor Vehicle Services follows the federal CDL standards established by FMCSA. To earn the Doubles/Triples credential, you must answer at least 80% of the questions correctly. Many candidates score lower the first time because the test pulls from a large pool — refreshing this page will give you a different mix of questions, drawn from the same authoritative source.
Want more practice? Try the full Doubles/Triples question bank or browse all Oregon CDL practice tests.