North Dakota School Bus CDL Practice Test
This is a free 20-question practice test for the School Bus portion of the North Dakota Commercial Driver's License knowledge exam. Questions are pulled from a pool of 55 drawn from the AAMVA CDL Manual, which is the source document the North Dakota Department of Transportation Drivers License Division uses to write its actual exam.
How it works: Click an answer. The correct choice highlights in green, and you'll see a short explanation. Aim for 85% or better before you sit for the real test in North Dakota.
Question 1 of 20
The minimum distance the front bumper of a stopped school bus should be from waiting students at the stop:
Correct. Stop with the front bumper at least 10 feet from waiting students so they have to walk forward to enter the bus, ensuring the driver can see them.
Question 2 of 20
When stopped to load or unload students, the bus driver should:
Correct. Standard procedure: parking brake set, neutral, red flashers and stop arm out, count students on/off, mirror check before resuming.
Question 3 of 20
When approaching the bus stop, you should activate the alternating amber warning lights:
Correct. Activate amber warning lights about 200 feet before the stop (further in higher-speed zones), giving traffic time to slow.
Question 4 of 20
Before resuming travel after a stop, the driver should:
Correct. Mirror sweep, count crossing students, verify clear danger zone, deactivate lights and stop arm, proceed slowly.
Question 5 of 20
A school bus evacuation is required when:
Correct. Evacuate for fire, danger of fire, on/near railroad tracks, in path of a train, or danger of being hit by another vehicle.
Question 6 of 20
During a fire on the bus, you should:
Correct. Stop, evacuate upwind to a safe distance (≥100 feet off the road), call 911. Use extinguisher only on small fires you can safely manage.
Question 7 of 20
A school bus driver should never:
Correct. Emergency exits are for emergencies. Routine use is unsafe and may damage the door or trigger interlocks.
Question 8 of 20
When you approach a railroad crossing in a school bus, you must stop:
Correct. Stop 15 to 50 feet from the nearest rail, open door and driver window, look and listen, then proceed without shifting gears.
Question 9 of 20
When students must cross the road to reach or leave the bus, they should:
Correct. Crossing students walk at least 10 feet ahead of the bus, in clear view, after the driver signals it is safe.
Question 10 of 20
When students are loading and approaching the bus from across the street:
Correct. Crossing students wait for the driver's signal that the road is clear before crossing in front of the bus.
Question 11 of 20
When stopped at a railroad crossing in a school bus, the driver should:
Correct. Open door and window, eliminate noise from the bus, look both ways, listen for whistles and bells. Cross only when clear.
Question 12 of 20
When loading students at a bus stop in front of houses:
Correct. Late students may approach from houses or driveways. Count, watch mirrors, and pause before moving.
Question 13 of 20
Pre-trip inspection of a school bus should include:
Correct. Standard CMV inspection plus school-bus-specific equipment: lights, stop arm, crossing arm, lift, kits, mirror condition.
Question 14 of 20
The school bus stop arm:
Correct. The stop arm signals approaching traffic to stop. Drivers who pass a stopped school bus with red lights flashing face heavy fines.
Question 15 of 20
When you cannot account for all students after unloading:
Correct. Missing student requires immediate search. Stop, brake, search the bus and the area around it before continuing.
Question 16 of 20
When you receive an emergency request to evacuate the bus, you should:
Correct. Calm authoritative voice. Direct to nearest safe exit. Move to safe area at least 100 feet off road. Account for all students.
Question 17 of 20
A school bus must stop at every railroad crossing:
Correct. School buses must stop at every railroad crossing 15 to 50 feet from the nearest rail. Open the entrance door and driver window, look and listen, then proceed without shifting gears.
Question 18 of 20
A "post-trip" inspection of the school bus should include:
Correct. Post-trip = walk every aisle, check every seat, all compartments. Document on DVIR.
Question 19 of 20
When loading students at the stop, the driver should:
Correct. Count students before, during, and after loading. Late students may approach in your blind spot.
Question 20 of 20
When the bus must stop because of crossing students, you should also:
Correct. The crossing-control arm extends in front of the bus, forcing students to walk where the driver can see them.
About the North Dakota School Bus exam
Most states administer 20 School Bus questions and require 80% to pass. The exam emphasizes loading and unloading procedures, the danger zone around the bus, emergency exit and evacuation procedures, railroad-highway crossings, and student management.
The North Dakota Department of Transportation Drivers License Division follows the federal CDL standards established by FMCSA. To earn the School Bus credential, you must answer at least 80% of the questions correctly. Many candidates score lower the first time because the test pulls from a large pool — refreshing this page will give you a different mix of questions, drawn from the same authoritative source.
Want more practice? Try the full School Bus question bank or browse all North Dakota CDL practice tests.